Very easy to use and Safe! For holding Endotracheal Tube in ANESTHESIA ICU ER Model No. : ETG-01 / ETG-02 / ETG-03 / ETG-04     1. 2. 3. 4. 5. BLACK TWIST LOCK-provides the extra security on tube position.The lock pivots to hold the clip in place. LOCKING CLIP-slides into place securing ET tubes(size4.5-14mm).A patented gear rack quickly snaps into place to secure tubing. OFF SET POSITION-provides wide access to the mouth. Visualize, suction or perform oral care as needed without moving the ETG-01. VELCRO STRAP-quickly and easily. Wraps around the patient's head to secure ETG-01 to face   How to Install    1. The patient must be in straight up position  2. There must be no foreign substances in the patient’s mouth.  3. Place etg-01 on either the left or the right-hand side of a patient’s mouth and open the mouth.  4. Place the Endotracheal tube on the body of etg-01..  5. Fixate the Endotracheal tube using the hose fixation clip(yellow color) of etg-01.  6. Push it with finger so that the tube gets tightened  7. Fixate the clip by rotating the fixation knob .  8. Move the fixation band and wrap it around the head of the patient and attach it on both sides of body.  9. Complete fixation by cutting off the fixation band to the appropriate length. 10.Dispose of the etg-01 once it is used as it is a disposable product   How to Remove   1. Untie the clip by rotating the fixation knob (black color) and release it 2. Remove it from the Endotracheal tube 3. Detach the fixation band from the patient   Use Precautions   1. It must be used by a professional medical practitioner only. 2. It must be used as originally intended 3. Check out the exterior and functionality before use. 4. Dispose of it after use as it is a disposable product